Hello, I’m wondering if someone could help me out here. I recently acquired an ATV2 with firmware 4.4.3 ( 9A405l) installed. I wanted to utilize Seas0npass 0.9.3 iFaith SHSH blob feature (Mac), but I’ve appeared to have stalled on a step in the process.
I select “Save firmware signatures…” and am able to get the ATV2 to enter DFU Mode. I then wait for the process to complete. But each time, the process stops (or freezes) at the “Verifying Board Type…” step. At one point, I let the process run for an hour, and still nothing. This occurs between the “iFaith payload upload successful! Reconnecting in 10 seconds...” and “Creating iFaith SHSH blob…” process steps.
A little info to help out – I’m using Mac OS X Mountain Lion. I’ve been able to jailbreak before with Seas0npass application. I don’t use antivirus software. I have used Filezila in the past. Otherwise, my desktop usage is pretty plain vanilla; I don’t have any programming background.
Here is my log file
2013-08-11 10:23:38.691 Seas0nPass[837:807]
2013-08-11 10:23:38.693 Seas0nPass[837:807] BEGIN NEW SESSION
2013-08-11 10:23:38.693 Seas0nPass[837:807] ************************
2013-08-11 10:23:38.694 Seas0nPass[837:807] Process: Seas0nPass
2013-08-11 10:23:38.695 Seas0nPass[837:807] Path: /Users/macbookpro/Desktop/Jailbreak tools/Seas0nPass 5.app/Contents/MacOS/Seas0nPass
2013-08-11 10:23:38.695 Seas0nPass[837:807] Identifier: com.firecore.Seas0nPass
2013-08-11 10:23:38.696 Seas0nPass[837:807] Version: 0.9.3 (728)
2013-08-11 10:23:38.696 Seas0nPass[837:807] Date/Time: 2013-08-11 09:23:38 +0000
2013-08-11 10:23:38.697 Seas0nPass[837:807] OS Version: 10.7.5 (11G63)
2013-08-11 10:23:40.159 Seas0nPass[837:807] ecidHex: 000003DFE109B5CC
2013-08-11 10:23:40.160 Seas0nPass[837:807] ecid: 4260088100300 deviceClass: k66ap
2013-08-11 10:23:40.230 Seas0nPass[837:807] already migrated
2013-08-11 10:23:40.231 Seas0nPass[837:807] local blobs already sent
No matching processes belonging to you were found
Initializing libpois0n
opening device 05ac:1227...
Setting to configuration 1
Setting to interface 0:0
Checking the device type
Preparing to upload limera1n exploit
Resetting device counters
Sending chunk headers
Sending exploit payload
Sending fake data
libusb: 0.000000 error [darwin_transfer_status] transfer error: timed out
Exploit sent
Reconnecting to device
Waiting 2 seconds for the device to pop up...
opening device 05ac:1227...
Setting to configuration 1
Setting to interface 0:0
Preparing to fetch DFU image from Apple's servers
Fetching Firmware/dfu/iBSS.k66ap.RELEASE.dfu...
Preparing to fetch DFU image from Apple's servers
Fetching Firmware/dfu/iBEC.k66ap.RELEASE.dfu...
libusb: 5.459873 error [darwin_reset_device] ResetDevice: unknown error
Waiting 10 seconds for the device to pop up...
opening device 05ac:1227...
Setting to configuration 1
Setting to interface 0:0
libusb: 18.259439 error [darwin_reset_device] ResetDevice: unknown error
Waiting 10 seconds for the device to pop up...
opening device 05ac:1281...
Setting to configuration 1
Setting to interface 0:0
libusb: 29.907697 error [get_endpoints] error getting pipe information for pipe 1: unknown error
libusb: 29.907936 error [darwin_set_interface_altsetting] could not build endpoint table
Setting to interface 1:1
libusb: 32.014940 error [darwin_transfer_status] transfer error: timed out
Exiting libpois0n
2013-08-11 10:26:18.875 Seas0nPass[853:807]
2013-08-11 10:26:18.875 Seas0nPass[853:807] BEGIN NEW SESSION
2013-08-11 10:26:18.876 Seas0nPass[853:807] ************************
2013-08-11 10:26:18.876 Seas0nPass[853:807] Process: Seas0nPass
2013-08-11 10:26:18.876 Seas0nPass[853:807] Path: /Users/macbookpro/Desktop/Jailbreak tools/Seas0nPass 5.app/Contents/MacOS/Seas0nPass
2013-08-11 10:26:18.877 Seas0nPass[853:807] Identifier: com.firecore.Seas0nPass
2013-08-11 10:26:18.877 Seas0nPass[853:807] Version: 0.9.3 (728)
2013-08-11 10:26:18.877 Seas0nPass[853:807] Date/Time: 2013-08-11 09:26:18 +0000
2013-08-11 10:26:18.878 Seas0nPass[853:807] OS Version: 10.7.5 (11G63)
2013-08-11 10:26:20.444 Seas0nPass[853:807] ecidHex: 000003DFE109B5CC
2013-08-11 10:26:20.444 Seas0nPass[853:807] ecid: 4260088100300 deviceClass: k66ap
2013-08-11 10:26:20.447 Seas0nPass[853:807] already migrated
2013-08-11 10:26:20.448 Seas0nPass[853:807] local blobs already sent
No matching processes belonging to you were found
Initializing libpois0n
opening device 05ac:1281...
Setting to configuration 1
Setting to interface 0:0
libusb: 0.000000 error [get_endpoints] error getting pipe information for pipe 1: unknown error
libusb: 0.000195 error [darwin_set_interface_altsetting] could not build endpoint table
Setting to interface 1:1
Device must be in DFU mode to continue
opening device 05ac:1281...
Setting to configuration 1
Setting to interface 0:0
libusb: 1.792032 error [get_endpoints] error getting pipe information for pipe 1: unknown error
libusb: 1.792238 error [darwin_set_interface_altsetting] could not build endpoint table
Setting to interface 1:1
Device must be in DFU mode to continue
opening device 05ac:1281...
Setting to configuration 1
Setting to interface 0:0
libusb: 3.584635 error [get_endpoints] error getting pipe information for pipe 1: unknown error
libusb: 3.584934 error [darwin_set_interface_altsetting] could not build endpoint table
Setting to interface 1:1
Device must be in DFU mode to continue
opening device 05ac:1281...
Setting to configuration 1
Setting to interface 0:0
libusb: 5.536123 error [get_endpoints] error getting pipe information for pipe 1: unknown error
libusb: 5.536383 error [darwin_set_interface_altsetting] could not build endpoint table
Setting to interface 1:1
Device must be in DFU mode to continue
opening device 05ac:1281...
Setting to configuration 1
Setting to interface 0:0
libusb: 7.487684 error [get_endpoints] error getting pipe information for pipe 1: unknown error
libusb: 7.487900 error [darwin_set_interface_altsetting] could not build endpoint table
Setting to interface 1:1
Device must be in DFU mode to continue
opening device 05ac:1281...
Setting to configuration 1
Setting to interface 0:0
libusb: 9.280110 error [get_endpoints] error getting pipe information for pipe 1: unknown error
libusb: 9.280334 error [darwin_set_interface_altsetting] could not build endpoint table
Setting to interface 1:1
Device must be in DFU mode to continue
opening device 05ac:1281...
Setting to configuration 1
Setting to interface 0:0
libusb: 11.072449 error [get_endpoints] error getting pipe information for pipe 1: unknown error
libusb: 11.072704 error [darwin_set_interface_altsetting] could not build endpoint table
Setting to interface 1:1
Device must be in DFU mode to continue
opening device 05ac:1281...
Setting to configuration 1
Setting to interface 0:0
libusb: 13.024409 error [get_endpoints] error getting pipe information for pipe 1: unknown error
libusb: 13.024696 error [darwin_set_interface_altsetting] could not build endpoint table
Setting to interface 1:1
Device must be in DFU mode to continue
opening device 05ac:1281...
Setting to configuration 1
Setting to interface 0:0
libusb: 14.975935 error [get_endpoints] error getting pipe information for pipe 1: unknown error
libusb: 14.976263 error [darwin_set_interface_altsetting] could not build endpoint table
Setting to interface 1:1
Device must be in DFU mode to continue
opening device 05ac:1281...
Setting to configuration 1
Setting to interface 0:0
libusb: 16.768184 error [get_endpoints] error getting pipe information for pipe 1: unknown error
libusb: 16.768463 error [darwin_set_interface_altsetting] could not build endpoint table
Setting to interface 1:1
Device must be in DFU mode to continue
Device must be in DFU mode to continue
opening device 05ac:1227...
Setting to configuration 1
Setting to interface 0:0
Checking the device type
Preparing to upload limera1n exploit
Resetting device counters
Sending chunk headers
Sending exploit payload
Sending fake data
libusb: 24.009136 error [darwin_transfer_status] transfer error: timed out
Exploit sent
Reconnecting to device
Waiting 2 seconds for the device to pop up...
opening device 05ac:1227...
Setting to configuration 1
Setting to interface 0:0
Preparing to fetch DFU image from Apple's servers
Fetching Firmware/dfu/iBSS.k66ap.RELEASE.dfu...
Preparing to fetch DFU image from Apple's servers
Fetching Firmware/dfu/iBEC.k66ap.RELEASE.dfu...
libusb: 30.998215 error [darwin_reset_device] ResetDevice: unknown error
Waiting 10 seconds for the device to pop up...
opening device 05ac:1227...
Setting to configuration 1
Setting to interface 0:0
libusb: 43.829617 error [darwin_reset_device] ResetDevice: unknown error
Waiting 10 seconds for the device to pop up...
opening device 05ac:1281...
Setting to configuration 1
Setting to interface 0:0
libusb: 55.469645 error [get_endpoints] error getting pipe information for pipe 1: unknown error
libusb: 55.469892 error [darwin_set_interface_altsetting] could not build endpoint table
Setting to interface 1:1
libusb: 57.018987 error [darwin_transfer_status] transfer error: timed out
Exiting libpois0n
2013-08-11 10:28:25.982 Seas0nPass[860:807]
2013-08-11 10:28:25.983 Seas0nPass[860:807] BEGIN NEW SESSION
2013-08-11 10:28:25.983 Seas0nPass[860:807] ************************
2013-08-11 10:28:25.984 Seas0nPass[860:807] Process: Seas0nPass
2013-08-11 10:28:25.984 Seas0nPass[860:807] Path: /Users/macbookpro/Desktop/Jailbreak tools/Seas0nPass 5.app/Contents/MacOS/Seas0nPass
2013-08-11 10:28:25.985 Seas0nPass[860:807] Identifier: com.firecore.Seas0nPass
2013-08-11 10:28:25.985 Seas0nPass[860:807] Version: 0.9.3 (728)
2013-08-11 10:28:25.985 Seas0nPass[860:807] Date/Time: 2013-08-11 09:28:25 +0000
2013-08-11 10:28:25.986 Seas0nPass[860:807] OS Version: 10.7.5 (11G63)
2013-08-11 10:28:27.436 Seas0nPass[860:807] ecid: (null) deviceClass: (null)
2013-08-11 10:28:27.443 Seas0nPass[860:807] already migrated
2013-08-11 10:28:27.444 Seas0nPass[860:807] local blobs already sent
I have also tryed with windos laptop and i could not save blobs with seasonpass, it got stack at uploading payload bin to the divice and then a pop up message comes from seasonpass : Seasonpass was unable to save signature for this apple tv.
I tryed to save blobs direct with ifaith but always got stucks at validating stuff with Apple tv 2
Any thoughts or ideas? Thanks