Plex Update broke AppleTV

Legacy 2nd gen Apple TV
1

Hey,

 

I just upgraded the Plex PlugIn via your Interface (0.6.7 now). After trying to restart the interface, nothing happens any more.

I tried to remove the plugin (apt-get remove com.plex.client-plugin) and to restart the interface (killall AppelTV), but no change.

I can connect via ssh, I see the AppleTV process, but nothing on the TV screen.

Any Ideas?!

 

Thank you,

Gregor.

 

dmesg says:

 

[000006.6133625]: AppleANX9836::downstreamSetTMDSState:(0x840bc400) TMDS output enabled

virtual void AppleRGBOUT::do_power_state_change(): fSoft: 1 fHard: 1 swapBusy: 0  fController: 0 -> 1

bool AppleRGBOUT::power_up_hardware()

bool AppleRGBOUT::power_up_hardware(), could not enable RGBOUT. Mode is set to TVOUT but could not locate TVOUT driver

void AppleRGBOUT::verify_swap_gated(IOMFBSwapIORequest*, bool*) failed mIsDPOut: 0 mDPDriver: 0 fTVOUTDelegate: 0

AppleRGBOUT verify_swap failed

virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0

IOReturn AppleRGBOUT::set_display_device_gated(uint32_t), 1

void AppleRGBOUT::verify_swap_gated(IOMFBSwapIORequest*, bool*) failed mIsDPOut: 0 mDPDriver: 0 fTVOUTDelegate: 0

AppleRGBOUT verify_swap failed

virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0

IOReturn IOMobileFramebufferUserClient::set_hotplug_notify(void*, void*) 0x31636b45 0x428b10

IOReturn IOMobileFramebufferUserClient::set_hotplug_notify(void*, void*) 0x86bcb800 0x84193804 0x31636b45 0x428b10

IOReturn AppleRGBOUT::set_display_device_gated(uint32_t), 1

AppleBCMWLAN::setPOWER() [configd]: Setting power state to 1

en1: setting diversity to: -1

en1: setting tx antenna: -1

AppleBCMWLAN::setPOWER() [configd]: Setting power state to 0

AppleBCMWLAN::powerOff Ready to power off

virtual void AppleRGBOUT::do_power_state_change(): fSoft: 1 fHard: 1 swapBusy: 0  fController: 0 -> 1

bool AppleRGBOUT::power_up_hardware()

bool AppleRGBOUT::power_up_hardware(), could not enable RGBOUT. Mode is set to TVOUT but could not locate TVOUT driver

void AppleRGBOUT::verify_swap_gated(IOMFBSwapIORequest*, bool*) failed mIsDPOut: 0 mDPDriver: 0 fTVOUTDelegate: 0

AppleRGBOUT verify_swap failed

virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0

IOReturn AppleRGBOUT::set_display_device_gated(uint32_t), 1

void AppleRGBOUT::verify_swap_gated(IOMFBSwapIORequest*, bool*) failed mIsDPOut: 0 mDPDriver: 0 fTVOUTDelegate: 0

AppleRGBOUT verify_swap failed

virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0

IOReturn IOMobileFramebufferUserClient::set_hotplug_notify(void*, void*) 0x31636b45 0x425e10

IOReturn IOMobileFramebufferUserClient::set_hotplug_notify(void*, void*) 0x84f0be00 0x864fdf30 0x31636b45 0x425e10

IOReturn AppleRGBOUT::set_display_device_gated(uint32_t), 1

AppleBCMWLAN::setPOWER() [configd]: Setting power state to 1

en1: setting diversity to: -1

en1: setting tx antenna: -1

AppleBCMWLAN::setPOWER() [configd]: Setting power state to 0

AppleBCMWLAN::powerOff Ready to power off

 

2

Same thing here.  It crashed and the only way to reboot was to do a complete restore through itunes.  2nd time this happened to me - 1st time was with XBMC.  I wonder if firecore is worth the trouble.

3

I think there is a problem with the killall script.

Run this way:

ps aux | grep AppleTV (use this to get the pid of AppleTV)

kill -9 whateveryourpidis

here is an example